- STORE
- >
- Nissan
- >
- Frontier 2022+
- >
- Front Suspension - Frontier 2022+
- >
- Upper and Lower Control Arms UCAs LCAs - Frontier 2022+
- >
- SPC - NISSAN LIGHT TRUCK - 25540
SPC - NISSAN LIGHT TRUCK - 25540
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for the Frontier, Pathfinder, and Xterra. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace armsare available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you -1° to +3° of caster and ±2° of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. To make installation easier, SPC now includes a bolt to replace the driver's side rearward bolt, which often needs to be cut out to remove the original arm. If you need more bolts for the other positions order p/n 21035 replacement bolt kit (2 bolts). Do you need replacement cams for the lower controlarm? Check out SPC p/n 87520, which will replace corroded cam bolt assemblies, or can be used on trucks not equipped with factory cam bolts for the lower control arm. These cams should be used with the upper arm kit
Additional fitment info from vendor. (See fitment disclaimer below)
- 2024 Nissan Frontier
- 2023 Nissan Frontier
- 2022 Nissan Frontier
- 2021 Nissan Frontier
- 2020 Nissan Frontier
- 2019 Nissan Frontier
- 2018 Nissan Frontier
- 2017 Nissan Frontier
- 2016 Nissan Frontier
- 2015 Nissan Frontier
- 2015 Nissan Xterra
- 2014 Nissan Frontier
- 2014 Nissan Xterra
- 2013 Nissan Frontier
- 2013 Nissan Xterra
- 2012 Nissan Frontier
- 2012 Nissan Pathfinder
- 2012 Nissan Xterra
- 2012 Suzuki Equator
- 2011 Nissan Frontier
- 2011 Nissan Pathfinder
- 2011 Nissan Xterra
- 2011 Suzuki Equator
- 2010 Nissan Frontier
- 2010 Nissan Pathfinder
- 2010 Nissan Xterra
- 2010 Suzuki Equator
- 2009 Nissan Frontier
- 2009 Nissan Pathfinder
- 2009 Nissan Xterra
- 2009 Suzuki Equator
- 2008 Nissan Frontier
- 2008 Nissan Pathfinder
- 2008 Nissan Xterra
- 2007 Nissan Frontier
- 2007 Nissan Pathfinder
- 2007 Nissan Xterra
- 2006 Nissan Frontier
- 2006 Nissan Pathfinder
- 2006 Nissan Xterra
- 2005 Nissan Frontier
- 2005 Nissan Pathfinder
- 2005 Nissan Xterra