ARB/OME - Nitrocharger Plus Rear Shocks [Tacoma 1996-2004] - 63062 63065
SKU:
$254.00
$254.00
per item
Old Man Emu Nitrocharger Plus shocks combine off-road dependability with smooth, on road driving and affordability. Nitrocharger Plus has been tested and tuned specifically to the vehicle providing performance across various driving conditions with vehicle-specific damping, tuned for different loads and vehicle setups. These dampers minimize body roll, enhance steering response, and deliver a more controlled ride, providing the confidence to navigate any terrain with ease. Designed to be paired with OME vehicle-specific coils, Nitrocharger Plus excels at carrying heavy loads, towing, navigating challenging landscapes, and ensures a customized and responsive ride every time.
- Twin Tube body for added protection in rough terrain
- Heavy-gauge steel tube construction for increased strength
- Vehicle specific bushes made from polyurethane and rubber materials for extended life
- Integrated high flow piston reduces aeration and high oil temperature, extending shock life and performance
- Vehicle specific tuning
- Direct replacement for OE and aftermarket shocks
Additional fitment info from vendor. (See fitment disclaimer below)
- 2004 Toyota Tacoma - Firmer valved shock
- 2003 Toyota Tacoma - Firmer valved shock
- 2002 Toyota Tacoma - Firmer valved shock
- 2001 Toyota Tacoma - Firmer valved shock
- 2000 Toyota Tacoma - Firmer valved shock
- 1999 Toyota Tacoma - Firmer valved shock
- 1998 Toyota Tacoma - Firmer valved shock
- 1994 Toyota Pickup 4WD - Firmer valved shock
- 1993 Toyota Pickup 4WD - Firmer valved shock
- 1992 Toyota Pickup 4WD - Firmer valved shock
- 1991 Toyota Pickup 4WD - Firmer valved shock
- 1990 Toyota 4Runner - Firmer valved shock
- 1990 Toyota Pickup 4WD - Firmer valved shock
- 1989 Toyota 4Runner - Firmer valved shock
- 1989 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1989 Toyota Pickup 4WD - Firmer valved shock
- 1988 Toyota 4Runner - Firmer valved shock
- 1988 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1988 Toyota Pickup 4WD - Firmer valved shock
- 1987 Toyota 4Runner - Firmer valved shock
- 1987 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1987 Toyota Pickup 4WD - Firmer valved shock
- 1986 Toyota 4Runner - Firmer valved shock
- 1986 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1986 Toyota Pickup 4WD - Firmer valved shock
- 1985 Toyota 4Runner - Firmer valved shock
- 1985 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1985 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1984 Toyota 4Runner - Firmer valved shock
- 1984 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1984 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1983 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1983 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1982 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1982 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1981 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1981 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1980 Toyota Land Cruiser - Post 1986 vehicles have 19mm mounting pin and accept shock part no's 63065 & 63062. Pre 1986 models have 16mm mounting pin and use 63064 & 63032.
- 1980 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
- 1979 Toyota Pickup 4WD - Shock selection 63064/63032 for medium and 63064 for heavy applications applies to vehicles up to 1984 due to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use 63065/63062 for medium applications and 63065 for heavy applications. Pick up models may require and FK03 (saddle correction plates) if the spring seats are distorted. FK10 must be fitted to all models used continually off road.
