- STORE
- >
- Chevrolet
- >
- Colorado
- >
- Colorado ZR2 2017+
- >
- Front Shocks - Coils - Coilovers - Colorado ZR2 2017+
- >
- Elka - 2.5 RESERVOIR FRONT SHOCKS for CHEVROLET / GMC Colorado ZR2 / Canyon AT4X, 2017 to 2022 (0 in. to 2.13 in. lift) - 90501
Elka - 2.5 RESERVOIR FRONT SHOCKS for CHEVROLET / GMC Colorado ZR2 / Canyon AT4X, 2017 to 2022 (0 in. to 2.13 in. lift) - 90501
SKU:
ELK90501
$2,300.00
$2,116.00
$2,116.00
Unavailable
per item
The 2.5 PIGGYBACK model features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. These shocks are a good performance upgrade over OEM shocks.
This configuration is optimized for use with stock geometry or can be used with lift kits between 0 in. to 2 in. that use stock length shocks (with or without relocator brackets).
Ride height is not affected by the installation of these shocks.
Package includes two (2) side-specific rear shocks:
Additional fitment info from vendor. (See fitment disclaimer below)
Increase the off-road capabilities while improving the comfort and handling of your truck
The 2.5 PIGGYBACK shocks provide the optimal combination of:- Firm and stable handling for driving on desert and fire roads (sports car feeling);
- Plush compliance while off-road driving over washboard;
- Strong ramping effect for extra bottom-out protection over large dips and washes;
- Maximum articulation and traction for rock climbing.
- High-performance off-road capabilities
- Improved handling and comfort for casual driving
- Better traction
- Provides leveling capabilities for better weight distribution
- Increased protection against bottoming-out
- Spring setup optimized for each setup
- Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
- Damping characteristics optimized for each truck and setup, providing a smoother ride
- Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
- More stable and more predictable handling
- Reduced front-end diving when cornering or braking
- Reduced rear-end bucking and lifting
- Increased damping and spring rate for better handling when towing or loading truck
- Massive 2.5 in. (56mm) hard-anodized aluminum body for cooler operation
- Big bore design with less restricted oil flow for increased responsiveness and less fading
- Internal hydraulic valving optimized for each vehicle platform
- Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
- External piggyback reservoir with low-friction floating piston (1:1 ratio vs. main piston) providing additional cooling
- DOT high-flow reservoir hose
- Heavy-duty 3/4 in. (19mm) induction-hardened shaft
- Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
- Direct, bolt-on replacement that uses stock shocks location
- Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
- Coilover models use Elka's durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
- Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available
Additional fitment info from vendor. (See fitment disclaimer below)
- Colorado ZR2 / Canyon AT4X
- 2017 to 2022