Elka Level 2 Complete 2.5 IFP Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL2)

STORE
>
Toyota
>
Tundra
>
Tundra 2007-2021
>
Suspension Kits - Tundra 2007-2021
>
Elka Kits - Tundra 2007-2021
>
Elka Level 2 Complete 2.5 IFP Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL2)

Elka Level 2 Complete 2.5 IFP Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL2)

SKU:

$3,689.93

$3,399.98 - $3,918.93

Unavailable

per item

For those looking for a step up from our entry level 2.0 Elka kit, look no further. Both the 2.5 IFP coilovers and rear shocks are a direct bolt-on upgrade over OEM shocks. The coilovers are designed to provide up to 3 inches of lift while providing additional travel over your factory suspension. The rear shocks are designed to support 0-2 in. of lift.

The shocks in this kit will improve the suspensions performance all while maintaining a comfortable on road ride. And unlike most of the competition, Elka includes detailed installation instruction as well as the necessary tooling for ride height adjustment.

This kit includes the following:

Elka 2.5" IFP Coilovers
Options for Upper Control Arms
Elka 2.5" IFP Rear Shocks
Options for an Add-a-leaf or rear lift shackles

NOTE: Icon aal will provide around 1.5" of lift and comes with ubolts.

KIT SHIPS FREE TO LOWER 48 STATES!

Quantity

Sold Out

Add to Cart

RIDE ENHANCEMENTS:

Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
Damping characteristics optimized for each truck and setup, providing a smoother ride
Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
More stable and more predictable handling
Reduced front-end diving when cornering or braking (front shocks)
Reduced rear-end bucking and lifting (rear shocks)
Increased damping and spring rate for better handling when towing or loading truck

TECHNICAL FEATURES:

Massive 2.5 in. (66mm) hard-anodized aluminum body for cooler operation
Gas-pressurized design with internal floating piston to prevent cavitation and fading
Internal hydraulic valving optimized for each vehicle platform
Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
Heavy-duty 3/4 in. (19mm) induction-hardened shaft
Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
Direct, bolt-on replacement that uses stock shocks location
Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
Coilover models use Elka’s durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

WHY ELKA?

Fully aluminum shock body is ideal for those living in harsh environments where rust is prevalent
Firm and stable handling for driving on desert and fire roads at higher speeds
Plush compliance while off-road driving over washboard
Strong ramping effect for extra bottom-out protection over large dips; Elka incorporates the use of an internal rebound coil within the shock that eliminates the harsh top out clunk at full extension.
Maximum articulation and traction for a variety of terrain, even rock climbing.

WHO IS ELKA?
For those who are not aware, Elka is not a new company, they have been producing high quality high performance shocks since 2000. Read Elka's about us HERE

Elka Level 2 Complete 2.5 IFP Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL2)

WARNING - Products sold on our site can expose you to chemicals which are known, per the State of California, to cause cancer, birth defects and or reproductive harm. For more information, go to www.P65Warnings.ca.gov.