Elka Level 1 Complete 2.0 IFP Suspension Kit for 2010+ Toyota 4Runner (NON-KDSS)

STORE
>
Toyota
>
4Runner
>
4Runner 2010+
>
Suspension Kits - 4Runner 2010+
>
Elka Kits- 4Runner 2010+
>
Elka Level 1 Complete 2.0 IFP Suspension Kit with UCA's for 2010+ Toyota 4Runner WITH-KDSS (ELKA10T4RLVL1-KDSS)

Elka Level 1 Complete 2.0 IFP Suspension Kit with UCA's for 2010+ Toyota 4Runner WITH-KDSS (ELKA10T4RLVL1-KDSS)

SKU:

$2,580.98

$2,354.98 - $2,818.93

Unavailable

per item

For those looking for a complete entry level Elka kit that includes everything needed, look no further. Both the 2.0 IFP coilovers and rear shocks are a direct bolt-on upgrade over OEM shocks.

The shocks in this kit will improve the suspensions performance all while maintaining a comfortable on road ride. And unlike most of the competition, Elka includes detailed installation instruction as well as the necessary tooling for ride height adjustment.

This kit includes the following:

Elka 2.0" IFP Coilovers (Options for 650lb or 700lb Coil) for 2-3" of lift pt #90300-650/700
Options for Upper Control Arms
Elka 2.0" IFP Rear Shocks pt #90292
Options for rear lift coils

NOTE:

Coils can provide a varying amount of height depending on overall weight of vehicle and items added to the rear of the 4Runner. Please see our rear coil page for specifications on each coil offered. 4Runner Rear Coils (2010-current)

ATTN: THIS PRODUCT SHIPS FOR FREE TO THE LOWER 48 STATES!

Quantity

Add to Cart

RIDE ENHANCEMENTS:

Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
Damping characteristics optimized for each truck and setup, providing a smoother ride
Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
More stable and more predictable handling
Reduced front-end diving when cornering or braking (front shocks)
Reduced rear-end bucking and lifting (rear shocks)
Increased damping and spring rate for better handling when towing or loading truck

TECHNICAL FEATURES:

2.0 hard-anodized aluminum body for cooler operation
Gas-pressurized design with internal floating piston to prevent cavitation and fading
Internal hydraulic valving optimized for each vehicle platform
Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
Direct, bolt-on replacement that uses stock shocks location
Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
Coilover models use Elka’s durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

WHY ELKA?

Fully aluminum shock body is ideal for those living in harsh environments where rust is prevalent
Firm and stable handling for driving on desert and fire roads at higher speeds
Plush compliance while off-road driving over washboard
Strong ramping effect for extra bottom-out protection over large dips; Elka incorporates the use of an internal rebound coil within the shock that eliminates the harsh top out clunk at full extension.
Maximum articulation and traction for a variety of terrain, even rock climbing.

WHO IS ELKA?
For those who are not aware, Elka is not a new company, they have been producing high quality high performance shocks since 2000. Read Elka's about us HERE

Elka Level 1 Complete 2.0 IFP Suspension Kit with UCA's for 2010+ Toyota 4Runner WITH-KDSS (ELKA10T4RLVL1-KDSS)

WARNING - Products sold on our site can expose you to chemicals which are known, per the State of California, to cause cancer, birth defects and or reproductive harm. For more information, go to www.P65Warnings.ca.gov.