HEADSTRONG OFF-ROAD
  • HOME
  • STORE
  • CONTACT
  • ABOUT HS
  • APPAREL
  • FAQ PAGE
  • Product
  • Product
  • HOME
  • STORE
  • CONTACT
  • ABOUT HS
  • APPAREL
  • FAQ PAGE
  • Product
  • Product
Search
  • STORE
  • >
  • Toyota
  • >
  • Tacoma
  • >
  • Tacoma 2005-2015 2nd Gen
  • >
  • Suspension Kits - Tacoma 2005-2015
  • >
  • Maxtrac Kits - Tacoma 2005-2015
  • >
  • Maxtrac 6.5" Lift Kit - 2WD ONLY - (K886864)

Maxtrac 6.5" Lift Kit - 2WD ONLY - (K886864)

SKU: MXTK886864
$1,049.99
$1,049.99
Unavailable
per item
Maxtrac lifted spindles are a simple, but extremely effective way of gaining additional clearance in the front of your vehicle for larger wheel and tire set-ups. By simply replacing the stock spindles which are known to bend
under extreme circumstances, you can achieve an additional 4" of lift while using the stock upper control arms, coils and shocks. Maxtrac spindles are cast from ductile iron and are designed to be 100% bolt on with extremely high durability. You may utilize the stock sway bar with these spindles along with the factory  ABS lines, but extended brake lines are needed and are provided.

NOTE: Spindles increase track width by 0.75" per side.  

Wheel and Tire Fitment:
​17" wheel minimum with a 4.75" backspacing or less ​
​Will clear up to 35" tire with proper wheel and tire selection.
​       Some trimming may be needed in order to clear
​
Kits include the following:
-  4" lift spindles with brake lines
-  2.5” Fabricated strut spacers 
-  4" fabricated lift blocks
-  U-bolts and hardware
-  Carrier bearing drop
-  Rear Brake line extension brackets 
-  Rear twin tube gas filled shocks
-  Limited Life Time Warranty


ATTN: THIS PRODUCT SHIPS FOR FREE TO THE LOWER 48 STATES!
  • Facebook
Add to Cart

WARNING - Products sold on our site can expose you to chemicals which are known, per the State of California, to cause cancer, birth defects and or reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

IMPORTANT LINKS
Ready to purchase?  We detail the ordering process HERE

FITMENT DISCLAIMER:
To the best of our knowledge, all photos and application information contained herein are accurate. However, HeadStrong Offroad assumes no liability related to product use and fitment. Buyers are solely responsible to insure that product use and fitment is consistent with their vehicles.


​IMPORTANT INFORMATION (click below):
​
Shipping | Return Policy | Warranties | Pricing | Sales Tax

Links, Affiliation and Forums
PayPal Acceptance Mark
HeadStrong Off-Road

​Copyright © 2018, HeadStrong Off-Road - All Rights Reserved

  • HOME
  • STORE
  • CONTACT
  • ABOUT HS
  • APPAREL
  • FAQ PAGE
  • Product
  • Product