FOX Level 4 Kit - 05+ Toyota Tacoma (FOX05LVL4)
Simply put this kit was put together with one thing in mind, performance. Between the large shock body diameter, the use of remote reservoirs (dual compression adjusters optional), and the 7/8” NitroSteel shafts, these shocks were made to take a beating and will do so while resisting shock fade. Both front and rear shocks offer vehicle specific valving and are designed to be mounted using the factory upper and lower mounts. For the front remote reservoirs, both the mounting plates and hardware is included. Both front and rear shocks offer incredible on and off-road performance.
NOTE: Product image was taken from FOX, actual item may vary slightly. Rear shocks in this kit are not piggyback, but remote reservoir. Also the shock is a stem/loop configuration for Tacoma not a loop/loop design as pictured.
For more information on these products as well as product specifications, visit www.ridefox.com and call them at the number listed on their site.
Kit includes the following
- FOX 2.5 Factory Coilovers w/resi (880-02-376 or 880-06-376 / Extended 880-02-418 or 880-06-418) – Preset for 2” lift (for 2016 models 1" lift)
- FOX 2.5 Factory Shocks w/resi (883-24-007 or 883-26-007)
- Rear lift options – Select from drop down (ubolt kit included w/ 3-leaf add-a-leaf not with single leaf add-a-leaf)
- Upper Control Arm options (needed for extended length COs) - Select from drop down below
KIT SHIPS FREE TO LOWER 48 STATES