Coil/Bilstein 5100 Kit w/ Dakars (HS05BK-1-Dakar)
This kit is the perfect solution for those who don't want to spend a lot of money yet want a kit that can handle the trails while having additional load carrying capabilities. This kit comes complete with everything needed to both lift the truck and improve the suspension for the typical weekend warrior. The Bilstiens work wonders controlling the changing terrain while sustaining the quality of on road ride, the OME coils better support the trucks front end weight over the factory coils while still offering plenty of flex.
OME leaf pack details
The "Medium Duty" leaf pack will provide approx. 2.75" lift while supporting 0 lbs - GVW while the "Heavy Duty" leaf pack will provide approx. 2.75" lift while supporting a constant load of 660 lbs. Please select your desired leaf pack in the drop down menu below.
Kit comes complete with the following:
Bilstein 5100 adjustable front struts, your choice of OME coils, one 1/4" top plate spacer the drivers side lean, RCD/Bilstein Extended length rear shocks, OME Dakar leaf packs, extended length u-bolts, OME carrier bearing drop bracket, FULL poly bushings and sleeve kit (part # FB05TAC) for the leaf pack eyes, and 24" SS rear brake lines.
Rear Shock Specifications:
- Collapsed: 16.34"
- Extended = 27.28"
- Travel = 10.94"
NOTE: We recommend cycling the rear suspension to ensure factory bump stops do not need to be modified.
ATTN: THIS PRODUCT SHIPS FOR FREE TO THE LOWER 48 STATES!
Coil selection should be made based on vehicle trim. In addition we have also provided an option to include upper control arms to allow for more alignment adjustment for lifts over 2". Kit will yield anywhere from 1"- 3.0" of lift, results vary depending on coil selection and model Tacoma). Since there are many coil options available to achieve the desired lift height, adjustments to the Bilsteins are not needed. If you do plan on adjusting the Bilsteins it is not recommended to go over the 2nd notch (0.85" setting). If having us do the assembly, we set the Bilsteins at the 0 setting (default setting) . Refer to coil description under coil page (click HERE) or call/e-mail to help with coil selection (reference disclaimer below).
The rear of the Tacoma varies in weight from one side to the other, this is due to the gas tank location which is located on the Driver’s Side. As a result it is not uncommon for a lean to be present both before and after a lift. In most cases this lean is more pronounced following a lift whereas pre-lift a lean may not have been visible. We at HeadStrong Off-Road are not responsible for this lean.
These kits are not guaranteed to level your truck, they can be used to do so with success; however, the final outcome is ultimately the buyers responsibility. Though we can provide guidance on the various selections available, we cannot predict the final height or whether or not the truck will sit level. The year, model, vehicle options, current condition of your factory suspension, and product tolerances can all influence the end results. The buyer should have a complete understanding of this before he or she places an order. The buyer should also consider these factors when making their selections.