- STORE
- >
- Toyota
- >
- Tacoma
- >
- Tacoma 2005-2015 2nd Gen
- >
- Rear Suspension - Tacoma 2005-2015
- >
- Other Rear Hardware - Tacoma 2005-2015
- >
- DuroBumps - Toyota Tacoma Tundra Rear Bump Stops For 05-22 Tacoma 00-21 Tundra DuroBumps (3.5 inch height) - DBR35TU
DuroBumps - Toyota Tacoma Tundra Rear Bump Stops For 05-22 Tacoma 00-21 Tundra DuroBumps (3.5 inch height) - DBR35TU
DuroBumps bump stops provide smooth, progressive dampening that greatly reduces hard bottom-outs and allows for greater control and comfort compared to OEM bump stops, which can be rock-hard on contact.
DuroBumps eliminate the shell-shock effect experienced when hitting OEM bump stops. These top-quality bump stops are proudly made in the USA with dual durometer (hardness) rubber.
The DuroBumps DBR35TU is designed to be slightly taller than OEM bump stops so that it compresses under load to deaden the impact just prior to the ultimate stop. It will not limit wheel-up travel compared to OEM bump stops. The DBR35TU is designed for stock-height trucks and mild lifts of up to 2 inch (fully loaded).
For lifts of more than 2 inch
Features and benefits
- Improved handling - Dual durometer rubber allows DuroBumps to act as secondary coil springs, with smooth engagement that progressively increases compression load in a predictable fashion.
- Mounts in OEM location - Easily installs under the U-bolts in the same location as OEM bump stops, ensuring a proper fit with no modifications.
- No loss of up travel - Direct OEM replacement with no loss of suspension/wheel-up travel.
- Increased suspension life - Greatly extends the service life of other suspension components by absorbing the shock load applied from suspension bottom-outs. DuroBumps absorb the impact, saving critical suspension components from excessive wear and extending service intervals for shocks and leaf-pack bushings.
- Small, compact, application specific - Designed for specific truck models. No universal fit spacers required.
- Smooth and silent - Unlike Hydro bumps, DuroBumps are whisper quiet on contact.
- Premium bump stops - DuroBumps are proudly made in the USA from the highest quality raw materials.
- Provided mounting hardware - Powder-coated steel mounting plates and JIS 10.9 zinc-coated hex head metric bolts and nuts are provided with every set of DuroBumps.
Note: For off-road use only. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications.
0 - 3 inch plus lift (Non-Long Travel) (recommended for OEM size rear shock, equivalent to OEM size bump stop) .7 inch at 1500 lbs Size: 3.25 dia. x 3.5 in. (ea.)
Weight: 39 oz. / 2.44 lbs. (set)
Additional fitment info from vendor. (See fitment disclaimer below)
- 2021 Toyota Tacoma Trail
- 2021 Toyota Tundra Nightshade
- 2021 Toyota Tundra Trail
- 2019 Toyota Tundra TRD Pro
- 2017 Toyota Tacoma TRD Pro
- 2016 Toyota Tacoma Limited
- 2016 Toyota Tacoma SR
- 2016 Toyota Tacoma SR5
- 2016 Toyota Tacoma TRD Off-Road
- 2016 Toyota Tacoma TRD Sport
- 2015 Toyota Tacoma TRD Pro
- 2015 Toyota Tundra TRD Pro
- 2014 Toyota Tundra 1794 Edition
- 2014 Toyota Tundra SR
- 2014 Toyota Tundra SR5
- 2013 Toyota Tundra Platinum
- 2005 Toyota Tacoma Pre Runner
- 2005 Toyota Tacoma X-Runner
- 2005 Toyota Tacoma
- 2000 Toyota Tundra Limited
- 2000 Toyota Tundra SR5
- 2000 Toyota Tundra