• STORE
• >
• Toyota
• >
• Tundra
• >
• Tundra 2007-2021
• >
• Suspension Kits - Tundra 2007-2021
• >
• Elka Kits - Tundra 2007-2021
• >
• Elka Level 4 Complete 2.5 with DSC Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL4)

Elka Level 4 Complete 2.5 with DSC Suspension Kit 2007+ Toyota Tundra (ELKA07TUNLVL4)

SKU:

$4,677.93

4387.98 4906.93 $4,387.98 - $4,906.93

Unavailable

per item

For those looking for a step up over our Level 3 Elka kit, look no further. Both the 2.5 remote reservoir coilovers and remote reservoir rear shocks, both with dual compression adjusters, are a direct bolt-on upgrade over OEM shocks. The DC remote reservoirs coilovers are designed to provide up to 3 inches of lift while providing additional travel over your factory suspension. The rear DC remote reservoir shocks are designed to support 0-2 in. of lift.

The shocks in this kit will significantly improve the suspensions performance all while maintaining a comfortable on road ride. And unlike most of the competition, Elka includes detailed installation instruction as well as the necessary tooling for ride height adjustment.

Front and Rear Dual compression (DC) adjusters:

Adjusters allow for precise fine-tuning of the high and low speed compression damping so you can adapt the suspension for your specific driving style and terrain conditions without compromise.

This kit includes the following:

• Elka 2.5" DC Remote Reservoir Coilovers (Options 0-2" or 2-3" front lift height)
• Options for Upper Control Arms
• Elka 2.5" DC Remote Reservoir Rear Shocks
• Options for an Add-a-leaf or lift shackles

NOTE: Icon 3-leaf aal will provide around 1.5" of lift andcomes with extended length ubolts.

KIT SHIPS FREE TO LOWER 48 STATES!

• Facebook
• Pinterest

Quantity

Add to Cart

RIDE ENHANCEMENTS:

• Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
• Damping characteristics optimized for each truck and setup, providing a smoother ride
• Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
• More stable and more predictable handling
• Reduced front-end diving when cornering or braking (front shocks)
• Reduced rear-end bucking and lifting (rear shocks)
• Increased damping and spring rate for better handling when towing or loading truck

TECHNICAL FEATURES:

• Massive 2.5 in. (66mm) hard-anodized aluminum body for cooler operation
• Gas-pressurized design with internal floating piston to prevent cavitation and fading
• Internal hydraulic valving optimized for each vehicle platform
• Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
• Heavy-duty 3/4 in. (19mm) induction-hardened shaft
• Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
• Direct, bolt-on replacement that uses stock shocks location
• Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
• Coilover models use Elka’s durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
• Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

WHY ELKA?​

• ​Fully aluminum shock body is ideal for those living in harsh environments where rust is prevalent
• Firm and stable handling for driving on desert and fire roads at higher speeds
• Plush compliance while off-road driving over washboard
• Strong ramping effect for extra bottom-out protection over large dips; Elka incorporates the use of an internal rebound coil within the shock that eliminates the harsh top out clunk at full extension.
• Maximum articulation and traction for a variety of terrain, even rock climbing.

WHO IS ELKA?
For those who are not aware, Elka is not a new company, they have been producing high quality high performance shocks since 2000. Read Elka's about us HERE